Publicidad
Idiomas disponibles
Idiomas disponibles
Battery Service (continued)
Installing the Battery
1. Position the battery in the tray.
2. Using the fasteners previously removed, install the positive (red) battery cable to the
positive (+) battery terminal.
3. Using the fasteners previously removed, install the negative battery cable to the
negative (-) battery terminal.
4. Slide the red terminal boot onto the positive (red) battery post.
5. Secure the battery with the hold-down.
Battery
Terminal boot
Negative (–) battery post
Wing nut, washer, and bolt
3465-582A
G440221
Battery hold-down
Bolt, washer, and nut
Positive (+) battery post
Page 5–16
Maintenance: Electrical System Maintenance
Publicidad
