Oleo-Mac BC 240 D-PU Manual De Uso Y Mantenimiento página 29

11. DECLARATION OF CONFORMITY
The undersigned, Emak spa via Fermi, 4 - 42011
Bagnolo in Piano (RE) ITALY declares under its own
GB
responsibility that the machine:
1. Category: engine
2. Brand Oleo-Mac, Type BC 240 D - PU
3. Serial ID 933 XXX 0001 ÷ 933 XXX 9999
conforms to the requirements of Directives:
2006/42/CE - 2014/30/EU - 97/68CE - 2004/26/CE,
conforms to the provisions of the following
harmonized standards:
12. WARRANTY CERTIFICATE
This machine has been designed and manufactured
using the most modern techniques. The manufacturer
guarantees its products for 24 months from the date
of purchase, for private and hobby use. The warranty
is limited to 12 months in case of professional use.
Limited warranty
1) The warranty period starts on the date of
purchase. The manufacturer, acting through the
sales and technical assistance network, shall
replace free of charge any parts proven defective
in material, machining or manufacturing. The
warranty does not affect the purchaser's rights as
established under legislation governing the
consequences of defects in the machine.
2) Technical personnel will undertake the necessary
repairs in the minimum time possible, compatible
with organisational needs.
3) To make any claim under the warranty, this
certificate of warranty, fully completed,
bearing the dealer's stamp and accompanied
by the invoice or receipt showing the date of
purchase, must be displayed to the personnel
authorised to approve work.
4) The warranty shall be null and void if:
- the machine has evidently not been serviced
correctly
MODEL
SERIAL No
BOUGHT BY Mr.
Do not send! Only attach to requests for technical warranties.
26
EN 12100 - 1 - EN 12100 - 2 - EN 55012
Te c h n i c a l D o c u m e n t a t i o n d e p o s i t e d w i t h
Administrative Headquarters: Technical Department
Signed in Bagnolo in Piano (RE) Italy - via Fermi, 4
Date: 20/04/2016
- the machine has been used for improper
purposes or has been modified in any way,
- unsuitable lubricants and fuels have been used
- non-original spare parts and accessories have
been fitted
- work has been done on the machine by
unauthorised personnel
5) The warranty does not cover consumables or
parts subject to normal wear.
6) The warranty does not cover work to update or
improve the machine.
7) The warranty does not cover any preparation or
servicing work required during the warranty
period.
8) Damage incurred during transport must be
immediately brought to the attention of the
carrier: failure to do so shall render the warranty
null and void.
9) Engines of other manufacturers (Briggs &
Stratton, Subaru, Honda, Kipor, Lombardini,
Kohler, etc.) fitted to our machines are covered by
the warranties of the engine manufacturer.
10) The warranty does not cover injury or damage
caused directly or indirectly to persons or things
by defects in the machine or by periods of
extended disuse of the machine resulting from
the said defects.
DATE
DEALER
Fausto Bellamico - President
s.p.a.