Descargar Imprimir esta página

Sony Handycam CCD-TR410E Manual De Instrucciones página 55

Publicidad

Set the selector to VIR (DC OUT)
and disconnect the mains lead.
After about one minute, try again.
The POWER lamp does
not light.
_
io
The CHARGE lamp
See the following chart.
flashes.
When the CHARGE Lamp Flashes
Check through the following chart.
Remove the battery pack from
the AC power adaptor.
Install the same
battery pack again.
If the CHARGE lamp flashes
again, install another battery
pack.
The CHARGE lamp lights up.
The CHARGE lamp flashes.
If the CHARGE lamp lights up and
goes out after a while, the battery pack
is operating correctly.*
If the CHARGE lamp goes out after a
while, the problem is with the battery
pack firstly installed.
The problem is with the AC power
adaptor.
Please contact your nearest Sony dealer.
uoneW
FeUOR
eUOIDI
UO}eU
55

Publicidad

loading

Este manual también es adecuado para:

Handycam ccd-tr420eHandycam ccd-tr440eHandycam ccd-tr510e