EINHELL HT 1600-F Instrucciones De Servicio página 18

Anleitung HT 1600-1801-F
GB
Working with the rotary nozzle
The rotary nozzle comes fitted in position ready for
immediate use.
Rotation of the cleaning jet as it emerges from the
rotary nozzle lends it twice the cleaning power of a
normal cleaning nozzle.
The first time a new nozzle is used it may be rather
slow in starting until the nozzle works itself free. If the
nozzle fails to rotate immediately, press the pistol
trigger a few times briefly in quick succession.
The rotary nozzle was developed specially for clea-
ning path slabs, facade walls, swimming-pools and
other surfaces on which dirt or moss accumulates.
Caution! Risk of injury! Never point the water jet
at persons or animals. For safety reasons,
always switch off the motor before changing the
nozzle!
Rotary nozzle, complete
Spare part No. 41.423.55
A bayonet lock is used to fasten the lance, rotary
nozzle and other accessories to the pistol handle.
To fasten, insert the lance in the pistol body, press
and twist to the left up to the stop.
To unfasten, press the lance into the pistol again,
twist to the right and pull out.
18
09.11.2001 7:52 Uhr
Disposing of the machine
When the high-pressure cleaner is no longer
required, proceed as follows:
Seite 18
Remove the power plug and render the machine
unworkable.
Store in a place that is inaccessible to children.
Parts from the old machine are not to be used as
replacement parts.
Disassemble the machine and dispose of its
various parts in accordance with the regulations
in force in your country.