Safety Rules; Explanation Of Safety Symbols; General - Fronius TIG Grinder Manual De Instrucciones

Rectificador para electrodos de tungsteno
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Safety rules

Explanation of
safety symbols
IMPORTANT! Indicates tips for correct operation and other particularly useful information.
It does not indicate a potentially damaging or dangerous situation.
If you see any of the symbols depicted in the "Safety rules" chapter, special care is re-
quired.

General

DANGER! Indicates immediate and real danger. If it is not avoided, death or se-
rious injury will result.
WARNING! Indicates a potentially dangerous situation. Death or serious injury
may result if appropriate precautions are not taken.
CAUTION! Indicates a situation where damage or injury could occur. If it is not
avoided, minor injury and/or damage to property may result.
NOTE! Indicates a risk of flawed results and possible damage to the equipment.
The device is manufactured using state-of-the-art technology and according
to recognised safety standards. If used incorrectly or misused, however, it can
cause:
-
injury or death to the operator or a third party,
-
damage to the device and other material assets belonging to the operat-
ing company,
-
inefficient operation of the device.
All persons involved in commissioning, operating, maintaining and servicing
the device must:
-
be suitably qualified,
-
read and follow these operating instructions carefully.
The operating instructions must always be at hand wherever the device is be-
ing used. In addition to the operating instructions, attention must also be paid
to any generally applicable and local regulations regarding accident preven-
tion and environmental protection.
All safety and danger notices on the device:
-
must be in a legible state,
-
must not be damaged,
-
must not be removed,
-
must not be covered, pasted or painted over.
For the location of the safety and danger notices on the device, refer to the
section headed "General remarks" in the operating instructions for the device.
Before switching on the device, remove any faults that could compromise
safety.
This is for your personal safety!
41

Publicidad

Tabla de contenido
loading

Tabla de contenido