Descargar Imprimir esta página

JUKI LU-2210N-6 Manual De Instrucciones página 11

Ocultar thumbs Ver también para LU-2210N-6:

Publicidad

FOR SAFE OPERATION
1. To avoid personal injury, never put your fingers under the needle when you turn ON
the power switch or operate the sewing machine.
2. To avoid personal injury, never put your fingers into the thread take-up cover while
the sewing machine is in operation.
3. Turn OFF the power switch before tilting the machine head or removing the belt
cover and the V belt.
4. To prevent possible personal injury caused by being caught in the machine, keep
your fingers, head and clothes away from the handwheel and the thread take-up
while the sewing machine is in operation. In addition, place nothing around it.
5. To avoid personal injury, never operate the sewing machine with the finger guard
removed.
6. To avoid personal injury, be careful not to allow your fingers in the machine when
tilting the machine head.
1. For the safety, never operate the sewing machine with the ground wire for the
power supply removed.
2. Be sure to turn OFF the power switch in prior when connecting/disconnecting the
power plug.
3. When thunders occurs, stop the work for the safety and disconnect the power plug.
4. When the sewing machine is suddenly moved from a cold place to a warm place,
there is a case where dew condensation may occur. Turn ON the power after there
is no worry of the drop of water.
5. To prevent fires, periodically draw out the power plug from the plug socket and
clean the root of the pins and the space between pins.
6. The hook rotates at a high speed while the machine is in operation.
To prevent possible injury to hands, be sure to keep your hands away from the
vicinity of the hook during operation. In addition, be sure to turn OFF the power to
the machine when replacing the bobbin.
7. The motor does not produce noise while the machine is at rest.
To avoid possible accidents due to abrupt start of the machine, be sure to turn OFF
the power to the machine.
8. Be careful of handling this product so as not to pour water or oil, shock by drop-
ping, and the like since this product is a precision instrument.
9. When tilting or returning the sewing machine to the home position, hold the upper
side of the machine head with both hands and perform the work quietly so that fin-
gers or the like are not caught in the machine.
x

Publicidad

loading