Kuppersbusch VKI3550.0SR Instrucciones Para La Instalación Y Recomendaciones De Uso Y Mantenimiento página 43

EN
Fig. 8
Fig. 9
the power level.
The Chef functions operate correctly
with pans with the same ferromagnetic
area on the base of the pan as the
area of the cooking zone. In addition,
for high temperature functions (above
100ºC), pans must have a flat, even
base (preferably "sandwich" type) as
shown in figure 6.
Fig. 6
To ensure the correct operation of
these functions, it is important that the
pan and the cooking zone are not hot
at the start of the process.
Further information about suitable
pans (saucepans, frying pans, grills,
etc.) is given on the Küppersbusch
web page.
The Touch Control has special features
that help the user to cook through the
CHEF sensor (9). These functions
42
are available depending on the model.
To activate a special feature on a zone:
1 First it should be selected; and then,
the decimal point (4) will be active
on the power indicator (3).
2 Now click on the CHEF sensor
(9). The sequentially successive
presses will go over all the CHEF
functions available in each zone
one by one. These functions
will show the activation with the
corresponding leds (14), (15), (16)
and (17).
If you want to cancel a special active
function at any time, you should touch
the "slider" cursor sensor (2)in the
position ''0''.
KEEP WARM FUNCTION
This function automatically sets an
appropriate power level to keep the
cooked food hot.
To activate it, select the plate, and
press on the CHEF sensor
until the led (16) located on the icon
lights up. Once the function is
activated, the symbol
on the power indicator (3).
You can override the function at
any time by turning off the plate,
by changing the power level or by
choosing a different special function.
MELTING FUNCTION
This function maintains a low
temperature in the cooking zone.
Ideal for defrosting food or for slowly
melting other food types as chocolate,
butter, etc.
To activate it, select the plate, and
press on the CHEF sensor
until the led (15) located on the icon
lights up. Once the function is
activated, the symbol
on the power indicator (3).
You can override the function at
any time by turning off the plate,
by changing the power level or by
choosing a different special function.
(9)
will appear
(9)
will appear