Baofeng UV-9R PRO Serie Manual Del Usuario página 143

MDF-A - Channel A
21
Display Mode
MDF-B - Channel B
22
Display Mode
BCL – Busy Channel
23
Lock-out
AUTOLK –Automatic
24
Keypad Lock
SFT-D – Frequency
25
Offset Direction
OFFSET -Frequency shift
26
amount
MENU+21
MENU+22
MENU+23
MENU+24
MENU+25
MENU+26
142
FREQ: Displays programmed Frequency
CH: Displays the channel number
NAME: Displays the channel name
*Note: Names must be entered using software.
FREQ: Displays programmed Frequency
CH: Displays the channel number
NAME: Displays the channel name
*Note: Names must be entered using software.
OFF ON
*Disables the [PTT] button on a channel that is
already in use. The transceiver will sound a
beep tone and will not transmit if the [PTT]
button is pressed when a channel is already in
use.
OFF ON
*When ON, the keypad will be locked if not
used in 8 seconds. Pressing the [#
2 seconds will unlock the keypad.
OFF: TX = RX (simplex)
+: TX will be shifted higher in frequency than RX
- : TX will be shifted lower in frequency than RX
00.000...69.990
*Specifies the difference between the TX and
RX frequencies
] key for