Publicidad
Idiomas disponibles
Idiomas disponibles
BAND - Band Selection
33
TDR-AB - Transmit
selection while in Dual
34
Watch mode
STE - Squelch Tail
35
Elimination
RP-STE-Squelch Tail
36
Elimination
RPT-RL - Delay the
37
squelch tail of repeater
MENU+33
MENU+34
MENU+35
MENU+36
MENU+37
144
VHF:144-148,UHF:430-450 (Canadian IC
standard)
VHF:144-146,UHF:430-440 (EU CE standard)
*In VFO/Frequency mode, sets [A] or [B] to the
VHF or UHF band.
OFF
A band transmit (Upper row frequency)
B band transmit (Bottom row frequency)
*When enabled, priority is returned to selected
display once the signal in the other display
disappears.
ON
*This function is used eliminate squelch tail
noise between pofung handhelds that are
communicating directly (no repeater).
Reception of a 55 Hz or 134.4 Hz tone burst
mutes the audio long enough to prevent
hearing any squelch tail noise.
OFF/ 1,2,3...10
*This function is used eliminate squelch tail
noise when communicating through a repeater.
OFF/ 1,2,3...10
*Delay the Tail Tone of Repeater (X100
milliseconds)
OFF
Publicidad
