cecotec BOLERO DRESSCODE 10800 INVERTER A Manual De Instrucciones página 108

ENGLISH
the display, it means that the washing machine uses cold water only (the internal heating
element for heating water would not be available in this programme).
2. Rotational speed indicator rpm
When a wash cycle is selected, the default spin speed of this programme will appear on
-
the display, with the spin speed indicator light illuminated.
You can change the spin speed value by pressing the SPEED button. If "- -" is shown on
-
the display, it means that the washing machine does not spin after the final draining
process in this programme.
3. Door lock indicator
The lit symbol indicates that the door is locked. To avoid any damage, wait until the icon
-
turns off before opening the door.
To open the door while a wash cycle is in progress, press the START/PAUSE button, if the
-
Door Lock icon is off, the door can be opened.
NOTE: for safety reasons it is not always possible to open the door once the wash cycle
-
has started.
4. Child-lock indicator
The lit icon means that the function is activated, the buttons on the control panel will be
locked (except the OFF position of the selector).
5. Delay end indicator
The lit icon means that the function is activated. The countdown to the end of the selected
wash cycle will appear on the digital display.
6. One touch indicator
The lit icon means that the "M-Smart" washing programme has been selected.
There are 3 ways to set this wash programme.
7. Rinse counter indicator
When the indicator light comes on, you can select the rinse count (rinses); the selected rinse
count will be shown on the display.
8. Type of stains indicator
The "stain type" icon lit means that a stain type has been selected, the device will
automatically set the most optimal cycle to remove the stains.
Types of stains (Fig. 15)
Oil
a.
Juices
b.
Pigments, paint
c.
BOLERO DRESSCODE 10800 INVERTER A/ STEEL A
108