Descargar Imprimir esta página

cecotec BOLERO DRESSCODE 10800 INVERTER A Manual De Instrucciones página 116

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 68
ENGLISH
4. After setting the child lock function, you can switch off the machine by turning the
washing cycle knob. When the machine is switched on again, it will directly run the
selected programme before it was switched off.
Adding laundry during a washing cycle
When the programme is running, press and hold the START/PAUSE button to pause the
machine. If the DOOR LOCK indicator light goes out, the door can be opened, you can add
or remove laundry. Once the operation is complete, close the door, press, and hold the
START/PAUSE button again and the machine continues to run from the point where it was
interrupted.
NOTE:
If the water level or water temperature in the drum is too high, the door lock indicator light
comes on, the door cannot be opened, and laundry cannot be added or removed during the
programme run (for safety reasons).
Load Balancing System
The washing machine has an automatic eccentric load detection system. In the spinning
process, if the laundry is unevenly distributed, the appliance will level and adjust the laundry
until it is evenly distributed before spinning. If the laundry cannot be evenly distributed within
the specified time, the appliance will not rotate to avoid excessive vibrations. At this point,
you should check whether the laundry is knotted or tangled and select the SPIN programme
after rearranging the laundry. When you wash less laundry, such as a pair of trousers, a
jumper, a bath towel, etc., the machine may not complete the spinning process due to balance
protection. Wash large and small items together as much as possible so that they do not get
tangled and in any case, it is easier to release them evenly and complete the spinning process
smoothly.
NOTE:
Due to the different types and materials of laundry, the automatic adjustment and balancing
system of the appliance can level and adjust the laundry several times to extend the spinning
time. This is a normal phenomenon, not an incidence of the machine.
Stain removal
This option allows you to select the type of stains on the laundry for better efficiency
-
during washing.
The appliance adjusts the average wash temperature, drum movement and soaking time
-
to the specific type of stain. Hot or cold water, gentle or intensive washing and long or
short soaking ensure that the washing sequences are specially adapted to each type of
stain. Selecting this option ensures that the stains are treated in the best possible way.
BOLERO DRESSCODE 10800 INVERTER A/ STEEL A
116

Publicidad

loading

Este manual también es adecuado para:

Bolero dresscode 10800 inverter steel a0278602787