cecotec BOLERO DRESSCODE 10800 INVERTER A Manual De Instrucciones página 127

U4 Door lock
fault
H Drum
temperature
is high
EXX Other errors
Note: Be sure to check the cause of the fault and clear the fault before pressing the START/
PAUSE button again. If the fault code is cleared, the appliance will continue to operate, and if
the fault code still exists, unplug the power cord, and call our Technical Support Service for
assistance as soon as possible.
Failure to empty the contents of the pockets may cause blockages in the pump or drain hose
or may damage the machine.
Do not wash items that do not have a laundry label, nor wash items that are not designed to
be machine washed.
7. TECHNICAL SPECIFICATIONS
You can find more information on this model by scanning the QR code (and the energy label
as well).
Reference:
Model
The door is not closed properly and the door lock does not
function normally. Close the door again, turn the wash cycle
selector to the OFF position to turn off the power supply, and
then turn the selector to select any wash programme and press
the START/PAUSE button to restart the programme. Eliminate
the causes of this failure. If the fault code still exists, please
contact the Cecotec Technical Support.
If the fault code appears and you cannot open the door, the door
lock may be faulty, please contact Cecotec Technical Support.
Press the START/PAUSE button to suspend operation of the
appliance and wait a few minutes. When the temperature in the
drum drops to a safe range and the fault code on the display is
cleared, press the START/PAUSE button to continue with the rest
of the programme. If the fault code still exists, please contact
the Cecotec Technical Support.
Turn the selector switch to turn off the appliance, unplug the
power cord and contact Cecotec Technical Support.
02786
Bolero DressCode 10800
Inverter A washing
machine
BOLERO DRESSCODE 10800 INVERTER A/ STEEL A
02787
Bolero Bolero
DressCode 10800
Inverter Steel A
ENGLISH
127