cecotec BOLERO DRESSCODE 10800 INVERTER A Manual De Instrucciones página 16

- Handle the machine carefully. Never hold each protruded
part on the machine while lifting. Do not use the door of the
device as a handle during transport.
- The device is heavy. Transport it with care.
- Secure the drain and water-supply hose correctly.
- Do not insert hands into the running water extracting tub.
- Do not close the door with excessive force. If it is found
difficult to close the door, please check if the clothes are
put in or distributed well.
- It is forbidden to wash carpets.
- Never refill the water by hand during washing.
Installation
- The appliance must be handled and installed by 2 or more
people to avoid risk of injury. Wear protective gloves when
unpacking and installing the product to avoid cutting
hazards.
- Keep children away during installation process.
- During installation, make sure that the power cable is not
damaged to avoid possible risk of fire or electric shock.
- Before using the device, it is imperative to remove the
transport screws.
- Keep the room dry and ventilated.
- Never place the appliance over the opening of an uncovered
drain.
- Do not expose the device to temperatures below 5ºC or
above 35ºC.
- Do not install in bathrooms or very damp rooms.
- Check that it is correctly levelled on the floor by means of
the feet.
- WARNING! Cecotec accepts no liability for incidents caused
by improper use outside the rules set out in this instruction
manual.
BOLERO DRESSCODE 10800 INVERTER A/ STEEL A
16