cecotec BOLERO DRESSCODE 9800 INVERTER A Manual De Instrucciones página 132

ENGLISH
Errors
Error
E02
E03
132 BOLERO DRESSCODE 9800 INVERTER A/ STEEL
Cause
No water in
Drain failure
Solution
Check if the tap is open. If the
water supply is cut off. Are
the mesh filter in the water
supply hose and the water
inlet valve blocked? What if
the water supply hose of the
appliance is frozen? Eliminate
the above causes of failure.
If the fault code still exists,
please contact the Cecotec
Technical Support.
Clean the pump filter.
Check if the drain hose is
bent, kinked or blocked.
Eliminate the above causes
of failure. If the fault code
still exists, please contact the
Cecotec Technical Support.