Publicidad
Idiomas disponibles
Idiomas disponibles
5 Transport and installation
5 Transport and installation
WARNING
Risk of injury due to improper transport and installation
Improper transport and installation can cause the device to tip or fall over. This may result in serious
injuries.
► Check and wear your personal protective equipment.
► Mount the device on a suitable base (flat, solid, dry).
► Note the weight of the device when lifting it.
4.2 Technical data on page EN-7
► Do not lift the device over persons or other devices.
NOTICE
Risk of material damage due to improper transport and installation
Improper transport or installation can cause the device to tip or fall over. This can result in material
damage and irreparable damage to the device.
► Protect the device against weather conditions, such as rain and direct sunlight.
► Mount the device on a suitable base (flat, solid, dry).
► Use the device only in dry, clean and well-ventilated rooms.
Fig. 2
Mounting the alignment jig
A Base plate
B Straightening unit
A
Attach the WH Tandem alignment jig to the installation site using cylinder head screws (6×) (D).
1
EN - 8
B
WH Tandem alignment jig
C M8 × 30 cylinder head screws (2×)
D M8 cylinder head screws (6×)
C
D
Publicidad
