Descargar Imprimir esta página

Kenwood BM260 Manual Del Usuario página 28

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
troubleshooting guide
PROBLEM
6. Collapsed
while baking.
7. Loaves uneven
shorter on one end.
8 Hole in bottom of loaf
9. Heavy dense texture.
10. Open, coarse, holey
texture.
11. Centre of loaf is raw,
not baked enough.
12. Bread doesn't slice
well, very sticky.
13. Dark crust colour/
too thick.
14. Loaf of bread is burnt.
15. Crust too light.
(continued)
POSSIBLE CAUSE
LOAF SIZE AND SHAPE
• Machine was placed in a draught or
may have been knocked or jolted
during rising.
• Exceeding capacity of bread pan.
• Not enough salt used or omitted. (salt
helps prevent the dough over proving)
• Too much yeast.
• Warm, humid weather.
• Dough too dry and not allowed to rise
evenly in pan.
• Hole left by kneader when loaf removed
from bread pan.
BREAD TEXTURE
• Too much flour.
• Not enough yeast.
• Not enough sugar.
• Salt omitted.
• Too much yeast.
• Too much liquid.
• Too much liquid.
• Power cut during operation.
• Quantities were too large and machine
could not cope.
• Sliced while too hot.
• Not using proper knife.
CRUST COLOUR AND THICKNESS
• DARK crust setting used.
• Bread maker malfunctioning.
• Bread not baked long enough.
• No milk powder or fresh milk in recipe.
SOLUTION
• Reposition bread maker.
• Do not use more ingredients than
recommended for large loaf (max. 1Kg).
• Use amount of salt recommended in
recipe.
• Measure yeast acurately.
• Reduce liquid by 15ml/3tsp and
reduce yeast by
• Increase liquid by 15ml/3 tsp.
• Normal situation
• Measure accurately.
• Measure right amount of
recommended yeast.
• Measure accurately.
• Assemble ingredients as listed in recipe.
• Measure right amount of recommended
yeast.
• Reduce liquid by 15ml/3tsp.
• Reduce liquid by 15ml/3tsp.
• If power is cut during operation for more
than 8 minutes you will need to remove the
unbaked loaf from the pan and start again
with fresh ingredients.
• Reduce amounts to maximum
quantities allowed.
• Allow bread to cool on rack at least
30 minutes to release steam, before
slicing.
• Use a good bread knife.
• Use medium or light setting the
next time.
• Refer to "Service and customer care"
section.
• Extend baking time.
• Add 15ml/3tsp skimmed milk powder
or replace 50% of water with milk to
encourage browning.
24
1
/
tsp.
4

Publicidad

loading