Mittelmann UniDrive Manual Original página 66

Appropriate special precautions must be taken for the transport and storage of the UNIDRIVE. For
þ
this a suitable transport and storage box should be used. In every case here, the operating instruc-
tions of the additional personal protective equipment against falling must be complied with.
6. Important Information
6.1 Testing and Approval of the Device
The UNIDRIVE is a type-tested Category III personal protective equipment product against falls. Pro-
duction of the equipment is subject to monitoring by the accredited certification body, DEKRA Testing
and Certification GmbH with the identification number 0158, Dinnendahlstr. 9, 44809 Bochum.
The UNIDRIVE has been tested and approved as a system. Every change to the system is life-threat-
ening and leads to the loss of the approval and the loss of the liability of the manufacturer.
6.2 Associated Documentation
Supplementary to these original operating instructions, all individual operating instructions 3 especially
warning information 3 of the components which are used together with the UNIDRIVE must be read
and understood before commissioning.
Original Operating Instructions UNIDRIVE
Page 18