Publicidad
Idiomas disponibles
Idiomas disponibles
Corrosion resistance when used in the open air is to a large extent ensured not only by the selection
þ
of the appropriate materials but also by protective surface coatings, whereby this must be supported
by the appropriate regular maintenance.
Emissions emitted by this machine are sound pressure values only which lie below 75 dB(A).
þ
Appropriate special precautions must be taken for the transport and storage of the UNIDRIVE. For
þ
this a suitable transport and storage box should be used. In every case here, the operating instruc-
tions of the additional personal protective equipment against falling must be complied with.
18. Important Information
18.1 Testing and Approval of the Device
The UNIDRIVE complies with the Machinery Directive 2006/42/EC and its components are type-tested
Category III personal protective equipment products against falls. They are subject to monitoring by
the accredited certification body, DEKRA Testing and Certification GmbH with the identification num-
ber 0158, Dinnendahlstr. 9, 44809 Bochum.
The UNIDRIVE working device has been tested and approved as a system in accordance with the Ma-
chinery Directive 2006/42/EC. Every change to the system is life-threatening and leads to the loss of
the approval and the loss of the liability of the manufacturer.
18.2 Associated Documentation
Supplementary to these original operating instructions, all individual operating instructions 3 especially
warning information 3 of the components of the UNIDRIVE must be read and understood before com-
missioning.
The individual operating instructions are:
of the guided-type fall arrester including flexible anchor lines in accordance with EN 353-2 with
÷
approval for use over edges and with appropriate connecting element length,
of the full body harness in accordance with EN 361,
÷
of the connecting elements in accordance with EN 362
÷
Original Operating Instructions UNIDRIVE
Page 40
Publicidad
