Waeco AirCon Service Center Instrucciones De Uso página 85

7.5 Air conditioning system test without refrigerant
service
The air conditioning can only be tested on vehicles with a low pressure
port and a high pressure port, or with a low pressure port only.
If you only test the function of a vehicle air conditioning system without
drawing off and recycling the refrigerant, the vehicle air conditioning
system would be missing the refrigerant remaining in the service hoses
of the air conditioning unit after the test. The "Air conditioning test"
menu item has been added to compensate for this loss.
The existing standard function processes "Short selection" and
"Free selection" already have a compensation function for service
hoses, which means the final air conditioning function test can be carried
out in the usual manner (the service hoses are drained by the unit).
1. First, fit the connections of the AirConServiceCenter to the vehicle air
conditioning system and open them.
2. Start the vehicle's engine and switch on the air conditioning system.
3. In standby mode, use the cursor keys
"Other selections":
4. Press ENTER to confirm.
5. Use the cursor keys
AirConServiceCenter
Short selection
Free selection
Other selections
ENTER-OK
or to select "Air conditioning test":
Air conditioning test
Service
ENTER-OK STOP-EXIT
Operation
or to select
85