Oase Bitron Premium 60 W Instrucciones De Uso página 48

Connecting two UVC clarifiers in series
To ensure a good sterilisation rate even for high flow volumes, a second UVC clarifier can be in-
stalled on the outside of the container outlet.
How to proceed:
1. Install the second UVC clarifier on the outside in front of the container outlet and connect it
to the outlet.
– Assembly material for installation on the ProfiClear Premium XL gravitation drain module:
Base, 110 mm high.
– Assembly material for installation on the ProfiClear Premium Individual Module and the Pro-
fiClear Premium Compact Classic pump chamber: Base, 120 mm high.
– Assembly material for connection with the container outlet: OASE accessories 73751.
– Assembly material for the UVC clarifier outlet: OASE accessories 73751 for connection of
pipe DN 110.
2. Use fastening brackets (OASE accessories 77192) to fasten the UVC clarifier on the container.
– The fastening brackets are fastened on the UVC clarifier and on the container wall.
3. Bitron Premium 120 W /180 W:Fasten the switch box on the water housing. (→ Installing the
switch box)
48
BTN0064