Oase Bitron Premium 60 W Instrucciones De Uso página 51

Commissioning/start-up
CAUTION
The ultra-violet radiation of the UVC lamp can damage your eyes and skin.
 Never operate the UVC lamp outside its housing.
Disconnect the unit from the mains before starting maintenance or before replacing the UVC

lamp.
NOTE
 First open the installed slide valves, then switch on the pump and then the UVC clarifier.
 Check all connections for leaks.
 When using filter starter, medicines or pond water treatments, do not operate the UVC clari-
fier for at least 36 hours.
 Check all connections for leaks.
When using filter starter, medicines or pond water treatments, do not operate the UVC clari-

fier for at least 36 hours.
Switching ON/OFF
Bitron Premium 60 W
–
• Insert the power plug into
Switching
on
• The unit switches on as
Switching
Disconnect the power plug.
off
the socket.
soon as the power connec-
tion is established.
Bitron Premium 120 W
• Insert the power plug into
the socket.
• Use the switch box to
switch on each UVC clarifier
separately.
Pull the power plug or use the
switch box to switch off each
UVC clarifier separately.
Bitron Premium 180 W
• Insert the power plug into
the socket.
• Use the switch box to
switch on each UVC clarifier
separately.
Pull the power plug or use the
switch box to switch off each
UVC clarifier separately.
EN
51