Oase Bitron Premium 60 W Instrucciones De Uso página 41

Horizontal installation of the UVC clarifier
Use suitable fastening materials (screws, dowels) for installation using the fastening brackets.
• Select the fastening materials so that the load is borne securely. Take the weight of the wa-
ter-filled unit into account. (→ Unit data)
How to proceed:
1. On the ground, mark the positions for the screws.
2. Drill holes and screw the wall brackets to the ground.
3. Fit the unit to the wall brackets using the nuts and bolts from the accessory kit.
4. Connect the inlet and outlet.
– Assembly material, inlet (IN): OASE accessories 73752, 73756 and hose ∅ 50 mm to the
pump
– Assembly material, outlet (OUT): OASE accessories 73751 for connection of pipe DN 110.
– Secure pipe DN 110 against slipping.
5. Bitron Premium 120 W /180 W: Fasten the switch box on the water housing. (→ Installing the
switch box)
EN
BTN0066
41