Oase Bitron Premium 60 W Instrucciones De Uso página 53

Regular tasks
Check at regular intervals that the unit is functioning perfectly. Determine suitable intervals de-
pending on the unit operating time and soiling of the water. The higher the demands on clean-
ing, the more often it is necessary to inspect the unit.
Removing/fitting the unit head
CAUTION
The ultra-violet radiation of the UVC lamp can damage your eyes and skin.
Never operate the UVC lamp outside its housing.

 Disconnect the unit from the mains before starting maintenance or before replacing the UVC
lamp.
CAUTION
Lamp is hot. Risk of burns due to contact with the lamp.
 Switch off the UVC clarifier and wait several minutes for the lamp to cool down before remov-
ing it.
How to proceed:
1. Press the locking hook, then turn the unit head counter-clockwise by approx. 30 degrees and
carefully remove it.
– Ensure that the transport protection on the quartz glass tube is not lost.
2. Carefully insert the unit head in the base at a twist angle of approx. 30 degrees and turn it
clockwise until the unit head audibly locks into place.
– Ensure that the transport protection is positioned on the quartz glass tube.
EN
BTN0048
53