cecotec BONGO X65 Serie Manual De Instrucciones página 32

ENGLISH
• WARNING! Regularly check the condition of components or parts subject to wear or
fatigue, such as the chassis, fork, wheels, brakes, etc. This will allow you to detect cracks
or damage in high-stress areas that may indicate the component's service life has been
exceeded and needs to be replaced. Regular maintenance of the electric scooter and its
components will extend its service life. Periodically check the tightness of the bolted
parts, especially the wheel axles, the folding mechanism, the steering system, and the
braking system.
• Contact your vendor to be referred to an appropriate training organisation.
• Avoid high traffic or overcrowded areas and anticipate your path and speed by
respecting the traffic code of the road, the code of the pavement and its most vulnerable
road users.
• Indicate your presence when approaching a pedestrian or cyclist and when you are not
seen and/or heard. Remember to cross protected areas on foot and in all situations take
care of yourself and others. Remove any sharp edges that may have been caused by the
use of the vehicle.
• Do not modify the use of the vehicle. This vehicle is not designed for stunt use.
2. PARTS AND COMPONENTS
Fig. 22
1. Handlebar
2. Headlights
3. Stem
4. Quick release lever
5. Front fork
6. Front fender
7. Driving wheel
8. Accelerator and power button
9. Control panel
10. Acoustic bell
11. Brake lever
12. Hook base
13. Tail lights
14. Rear fender
15. Pedal
16. Rear wheel
17. Brake disc
18. Battery
19. Kickstand
62 ORIGINAL MANUAL TRANSLATION
Fig. 23
1. Drive mode
2. Pedestrian mode
3. Light
4. Warning
5. Bluetooth
6. Speed indicator
7. Trip or ODO
8. Distance
9. Units of distance
10. Battery level
11. Speed units
12. Cruise control
13. Brake lever with bell
14. Display
15. Power button
16. Accelerator
Note:
The graphics in this manual are schematic representations and may not exactly match the
product.
3. BEFORE USE
• This electric scooter features packaging designed to protect it during transport. Take
the electric scooter out of its box and remove all packaging materials. You can keep the
original box and other packaging elements in a safe place. This will help you prevent
product damage when transporting it in the future. In case the original packaging is
disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the official Cecotec Technical
Support Service.
Box contents
Fig. 24
1. Bongo X65 Connected Series electric scooter
2. Allen key
3. Charger
4. Screws x4
ENGLISH
BONGO SERIE X65 63