Publicidad
Idiomas disponibles
Idiomas disponibles
The appliance must be within the coverage radius of the Wi-Fi network in use,
therefore at a reasonable distance from routers or access points. Verify the
presence of the signal at the point where you wish to install the appliance with
the aid of a mobile device that is already connected.
The mobile device (smartphone or tablet) on which you intend to install the
app must also be connected to the same Wi-Fi network.
The appliance has a 2.4 GHz connection, so this band must be separate from
the 5 GHz band and individually identifiable in order to be able to use the
functions on the app. If necessary, change the router or access point settings
by differentiating the network names of the two bands.
Follow the steps below to make the connection:
Download and install the Hom-io app from the Apple Store or Play Store.
Grant the app access to the various services required (e.g. geolocation,
Bluetooth).
Register on the app by creating an account.
Complete the steps related to the definition of the "Your home" settings (e.g.
house name, GPS position, etc.).
Disconnect and reconnect the appliance from the power supply.
Check that the D icon is flashing.
On the main page of the app, tap "Add device" (alternatively you can use the
"+" button in the top right corner).
The app will locate the appliance on the local network, showing its name at the
top of the display.
Tap "add" and follow the subsequent instructions on the mobile device display.
If the appliance is not shown, tap "Add device" again, then select "Kitchen"
from the list on the left, select "Geneva" and follow the next instructions on the
display of the mobile device.
Once the connection is complete, icon A remains permanently lit on the display
to indicate that the connection is established.
25
Publicidad
