Shark AERON-GP Manual Del Usuario página 16

ANTI-FOG BREATH GUARD
The anti-fog breath guard greatly
reduces air turbulence and helps to make
the helmet completely soundproof.
ANTI-FOG MASK
Small mask (summer)
ASSEMBLY: the small mask attaches
to the helmet using a bayonet system.
Present the mask in front of the 3
support pins and insert them into the
housings and tabs (1).
16
However, you can remove it as follows:
1 - Starting with one side at a time, pull
the guard towards you to release it from
its location.
2 - Reinsert one side then the other to
reposition it.
1
Move to the right (facing the helmet)
to lock it (2). Finish locking by pressing
on the tabs.
DISASSEMBLY: Move the mask in
the direction opposite the direction
of assembly then extract it from the
support pins.
1
2
2