Shark AERON-GP Manual Del Usuario página 17

ANTI-FOG MASK
Large mask (winter/racing)
ASSEMBLY TIPS
1 - To use the racing anti-fog mask,
remove the small mask.
2 - Fasten the upper part onto the 3
pins of the mask support. Place the
2 side fastening tubes in their housing.
Repeat the operation on the opposite
side of the mask.
Two air extractors ensure perfect air
renewal even in the most extreme
conditions.
ASSEMBLY TIPS
Remove the tubes from their housings.
Detach the upper part of these 3
fastening pins and remove the mask.
CAUTION! The positioning of the
interior is critical for keeping the
helmet on your head. If you are unsure
about disassembling or reassembling
the interior, do not use your helmet.
Contact your retailer for assistance and
advice. Never use a helmet missing any
part making up its interior, it will not
protect you in the event of an accident.
3
1
2
4
17