Publicidad
Idiomas disponibles
Idiomas disponibles
en
18
Replacing the punch (BLK5.0E (**))
(figure 8).
Turn locking lever 90° counterclockwise.
Turn the die counterclockwise by 45° and
pull it off.
Replace the punch by turning it 180° clock-
wise and then pulling it out.
Apply a light coat of grease to the new
punch before inserting it.
Reinsert a punch and turn it counterclock-
wise by 180°.
Remount the die and turn it counterclock-
wise by 45°.
Turn the locking lever 90° clockwise.
Fig. 8
3.
45°
4.
Die
Punch
180°
9.
10.
1.
90°
Locking lever
2.
180°
5.
6.
8.
7.
90°
11.
45°
Publicidad
