Publicidad
Idiomas disponibles
Idiomas disponibles
en
8
Intended use of the power tool:
Hand-guided nibbler for cutting sheet metal,
cut-outs and tight curves in weather-pro-
tected environments without water supply
using the application tools and accessories
recommended by FEIN.
Operation of the power tool off power generators.
This power tool is also suitable for use
with AC generators with sufficient
power output that correspond to the Stan-
dard ISO 8528, design type G2. This Stan-
dard is particularly not complied with when
the so-called distortion factor exceeds
10 %. When in doubt, please refer to the
generator instruction/specification guide.
Symbols.
Symbol, character Explanation
DANGER
WARNING
CAUTION
Make sure to read the enclosed documents such as the Instruction
Manual and the General Safety Instructions.
Observe the instructions in the text or graphic opposite!
Observe the notes in the text aside!
General prohibition sign. This action is prohibited.
Before commencing this working step, pull the power plug out of the
socket. Otherwise there will be danger of injury if the power tool
should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
This symbol confirms the certification of this product for the USA and
Canada.
This sign warns of a directly imminent, dangerous situation. A false
reaction can cause a severe or fatal injury.
This sign indicates a possible dangerous situation that could cause
severe or fatal injury.
This sign warns of a possible dangerous situation that could cause
injury.
Operating the power tool off
WARNING
power generators whose no-
load speed exceeds the voltage value on the
type plate of the power tool is prohibited.
Publicidad
