Publicidad
Idiomas disponibles
Idiomas disponibles
en
20
Working instructions.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Features
The restarting protection prevents the
power tool from automatically restarting if
the power supply is interrupted during
operation. In this case, switch off the power
tool, check the power supply and then
switch the power tool on again.
The electronic stroke rate preselection
enables the speed to be adapted to the
respective application and the respective
application tool.
The power tool is fitted with overload and
blocking protection. In case of overload or
blocking of the application tool, the power
supply is interrupted. In this case, switch the
power tool off, remove it from the work-
piece and check the application tool. After-
wards, switch the power tool on again.
Publicidad
