Fein BLK3.5E Instrucciones De Uso página 19

Replacing the die (BLK3.5E (**))
(figure 9).
Turn the union nut clockwise by 45° and
push it upward.
Replace the die.
Push the union nut down again and turn it
counterclockwise by 45°.
Replacing the die (BLK5.0E (**))
(figure 10).
Loosen the screws with the hex key.
Replace the die.
Lightly grease the sliding surface between
die holder and punch.
Retighten the screws with the hex key.
Fig. 9
1.
Union nut
Fig. 10
Die
2.
1.
4 mm
Die
holder
en
19
4.
2.
3.
Die
3.
4.
4 mm