cecotec BOLERO GRANDSOMMELIER 1230 COOLCRYSTAL Manual De Instrucciones página 49

1. PARTS AND COMPONENTS
Fig. 1
1. Cabinet
2. Shelf (x5)
3. Fan
4. Fan cover
5. Ventilation slots
6. Levelling feet
7. Upper hinge with cover
8. Door
9. Door sealing
10. Lower hinge
Note:
The graphics in this manual are schematic representations and may not exactly match the
-
appliance.
To make the most out of the device in terms of energy, place all the shelves and drawers in
-
their original position, that is, as shown in Figure 1.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
3. INSTALLATION
- The location you choose for the device must be properly ventilated and far from heat
sources. Do not place the device near heat sources, like a hob, and avoid direct sunlight to
ensure the cooling effect and save on energy. It is not recommended to place the device in
a wet place, as it may rust and cause electrical leakage.
- During operation, the device releases heat into the environment. It is very important to
assure that this heat dissipates correctly, for this it is important to follow these instructions:
BOLERO GRANDSOMMELIER 1230 COOLCRYSTAL / COOLWOOD
ENGLISH
49