cecotec BOLERO GRANDSOMMELIER 1230 COOLCRYSTAL Manual De Instrucciones página 53

The appliance is not cold
enough
The light does not work.
Vibrations.
The appliance makes too
much noise.
The door does not close
properly.
Frost is generated inside
Note:
If none of these situations match your problem, do not attempt to disassemble or repair the
device by yourself. Repairs carried out by unqualified persons may result in injury or serious
malfunctions. Contact the official Cecotec Technical Support Service. The repair must be carried
out by an authorised technician and you must use only original spare parts.
7. CLEANING AND MAINTENANCE
Unplug the appliance from the mains and let it cool down before cleaning it.
-
Use a soft, damp cloth to clean the surface of the appliance.
-
High ambient temperature may require setting the
appliance to a colder temperature. Increase the selected
temperature.
The door is opened too often.
The door is not completely closed.
The door is not positioned correctly or is worn.
There is not enough space for ventilation around the
appliance.
The ambient temperature is higher than the maximum
supported temperature.
Damaged PCB or fan. Contact the Technical Support Service
of Cecotec.
The light has been damaged. Contact the Technical Support
Service of Cecotec.
Check if the appliance is level.
The appliance is too close to walls or objects around it.
The appliance is not level.
The appliance is too close to the walls or objects around it.
Damaged fan. Contact the Technical Support Service of
Cecotec.
The appliance is not level.
The shelves are incorrectly positioned and prevent the door
from closing.
Unplug the wine cooler for 1 hour. After this time, connect
it again.
Room temperature is too cold.
BOLERO GRANDSOMMELIER 1230 COOLCRYSTAL / COOLWOOD
ENGLISH
53