Descargar Imprimir esta página

Metabo HPT NV 83A5 Instrucciones Y Manual De Seguridad página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

English
ACCESSORIES
● Accessories other than those shown below can lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
Eye protection ..................................................................................................................................................1
Hook ................................................................................................................................................................1
Trigger (A) (Contact Actuation Trigger/Color: Silver) .......................................................................................1
Shaft Ring ........................................................................................................................................................1
OPTIONAL ACCESSORIES... sold separately
○ Pneumatic Tool Lubricant
1.0 oz. (30 cc) oil feeder
4 oz. (120 cc) oil feeder
1 quart (1 ltr) can
NOTE: Accessories are subject to change without any obligation on the part of metabo HPT.
APPLICATIONS
○ Construction wooden work such as fl oor and wall
framing, roof decking, subfl ooring.
○ Mobile and modular home construction.
○ Making wooden boxes, palettes, and drums.
○ Packing operations in manufacturing plants, and
other types of packing and crating work in general.
BEFORE OPERATION
Read section titled "SAFETY" (pages 3–7).
Make sure of the followings before operation.
WORKING ENVIRONMENT
● No fl ammable gas, liquid or other fl ammable
objects at worksite.
● Clear the area of children or unauthorized
personnel.
10
(Code No. 877153)
(Code No. 874042)
(Code No. 876212)
WARNING
WARNING
AIR SUPPLY
● Never
which
(13.7 bar 14 kgf/cm
● Never use non relieving coupler on Nailer.
1. Power source
○ Use only clean, dry, regulated compressed air as a
power source for this Nailer.
○ Air compressors used to supply compressed air to
this Nailer must comply with the requirements of
the latest version of ANSI Standard B 19.3 "Safety
Standard For Compressors For Process Industries."
○ Moisture or oil in the air compressor may accelerate
wear and corrosion in the Nailer.
Drain daily.
DANGER
● NEVER use reactive gases or
other
bottled
Explosion may occur.
WARNING
connect
Nailer
to
potentially
exceeds
) if a regulator fails.
2
gases.
pressure
200
psi

Publicidad

loading