Metabo HPT NV 83A5 Instrucciones Y Manual De Seguridad página 9

SPECIFICATIONS
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet
NAIL SELECTION
● Be sure to use only the genuine metabo HPT nails for the NV83A5. The use of any other nails can result in
tool malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
Wire-collated coil nails
70–120 psi (4.9–8.3 bar 5–8.5 kgf/cm
12-13/32" × 13-11/16" × 5-13/32"
(315 mm × 348 mm × 137 mm)
8.8 lbs (4.0 kg) (Without Hook)
200–300 nails (1 coil)
.088 ft /cycle at 100 psi
3
(2.5 ltr/cycle at 6.9 bar)
(2.5 ltr/cycle at 7 kgf/cm
3/8 NPT Thread
WARNING
Min.
.236"
(6 mm)
.099"
(2.5 mm)
English
)
2
)
2
Max.
.283"
(7.2 mm)
.131"
(3.3 mm)
9