and suffocation.
Before disposing of old products
that shall not be used any more:
1.
Unplug the power cord
from the mains socket.
2.
Cut the power cord and
remove it from the appliance
together with the plug.
3.
Do not remove the racks
and drawers from the product
to prevent children from getting
inside the appliance.
4.
Remove the doors.
5.
Store the product so that
it shall not be tipped over.
6.
Do not allow children to
play with the scrapped product.
Do not dispose of the product
by throwing it into fire. Risk of
explosion.
If there is a lock available in
the product's door, keep the
key out of children's reach.
1.3 Electrical safety
The product shall not be plugged
into the outlet during installation,
maintenance, cleaning, repair, and
transportation operations.
If the power the cord is damaged,
it shall be replaced by authorized
service only to avoid any risk that
may occur.
Do not tuck the power cord under
the product or to the rear of the
product. Do not put heavy items
on the power cord. The power cord
should not be bent, crushed, and
come into contact with any heat
source.
Do not use an extension cord,
multi-plug or adaptor to operate
4
your product.
Portable multi sockets or portable
power supplies may overheat and
cause fire. Thus, do not have a
multi-plug behind or in the vicinity
of the product.
The plug shall be easily accessible.
If this is not possible, a mechanism
that meets the electrical
legislation and that disconnects
all terminals from the mains
(fuse, switch, main switch, etc.)
shall be available on the electrical
installation.
Do not touch the plug with wet
hands.
When unplugging the appliance,
don't hold the power cord, but the
plug.
When positioning the appliance,
ensure the supply cord is not
trapped or damaged
Do not locate multiple portable
socket-outlets or portable
power supplies at the rear of the
appliance.
1.4 Handling Safety
This product is heavy, do not
handle it by yourself.
Do not hold the product from its
door while handling the product.
Be careful not to damage the
cooling system and the pipes
while handling the product. Do
not operate the product if the
pipes are damaged, and contact an
authorized service.
1.5 Installation Safety
Contact the Authorized Service
for the product's installation.
To prepare the product for
installation, see the information in