Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE FIRST USE
Step 1. Remove Packaging
Ensure all packaging has been removed.
Important: Remove the red Plug found at the base of the Water Reservoir.
Step 2. Position Machine
Ensure the espresso machine is always positioned onto a dry, stable, flat horizontal counter top.
Step 3. Wash Parts
Wash the parts listed below in warm water with a mild detergent.
- Stainless Steel Milk Pitcher
- Stainless Steel Drip Tray Grill
- Stainless Steel One Cup Filter Basket
- Stainless Steel Two Cup Filter Basket
Important:
The 4 parts below are NOT dish washer safe.
- Portafilter
- Drip Tray
- Tamper
- Water Reservoir
Rinse and dry each part thoroughly then place on the machine.
• Power
- Ensure that the dial is in the OFF position.
- Insert the power plug into a 127V/220V AC power outlet and switch the power on.
- Press the ON/OFF button to turn on the machine.
- The 1 CUP & 2 CUP buttons will pulse to indicate the machine is heating up.
- When the machine is ready, the ON/OFF, 1 CUP and 2 CUP buttons will illuminate the machine
is ready to use.
Step 4. Prime espresso machine
- Place 2 large cups under the group head and steam wand.
Slimline Coffeemaker_BVSTEM7200_22SEPM4 (LA).indd 6-7
Slimline Coffeemaker_BVSTEM7200_22SEPM4 (LA).indd 6-7
English-6
BEFORE FIRST USE
- Put water on the water tank (8oz minimum)
- Press the 2 CUP button and water will start flowing from the group head.
- Allow water to run through until it stops.
- Turn dial to the HOT WATER position.
- Allow hot water to run through for 20 seconds.
- Return dial to OFF position.
English-7
2022/12/13 9:33 AM
2022/12/13 9:33 AM
Publicidad
