Package Contents - Epson BrightLink 475wi+ Guia De Instalacion

1 Package Contents

Wall mount attached to wall plate
3-axis adjustment unit (attached
to slide plate when shipped)
Hexagon wrench (for M4)
VGA computer cable (may be included
with projector or wall mount)
Shape
M4 × 12 mm hexagon socket head cap bolt with
washer/spring washer
M6 × 20 mm hexagon shoulder bolt with washer/
spring washer
M6 × 20 mm cross recessed head shoulder screw
with plastic washer
•
Use the bolts or screws supplied with the wall mount to install it as directed in this guide. Do not
substitute these bolts with any other types.
•
You need to use commercially available M8 × 50 mm anchors (at least 3) to attach the wall plate to the
wall.
•
Gather the tools and parts you need before you begin installation, including a No.3 cross-head
screwdriver.
Wall plate (The center plate is attached to the wall mount when shipped.)
Slide plate
End cap
Open-ended wrench
13 mm (for M8 and M6) × 6 mm
(for hexagonal shaft)
Name
4
Wall plate cover
Template sheet
(for installing the wall plate)
Quantity
6 For wall plate assembly
4 For 3-axis adjustment unit/wall mount
installation
4 For slide plate/projector installation
2 For slide plate/3-axis adjustment unit
installation (secured when shipped)
1 For wall mount/wall plate installation
(secured when shipped)
3
Application