Epson BrightLink 475wi+ Guia De Instalacion página 77

B
Attach the cable cover to the projector
Attach the cable cover and use a cross-head screwdriver to tighten the screws (×2) and secure the cable
cover.
Cable cover
Caution
Only a specialist should remove or reinstall the projector, including for maintenance and
repairs. Refer to the projector User's Guide for instructions on maintenance and repairs.
Warning
❏
Never loosen the bolts and nuts after installation. Confirm that the screws have not
become loose on a regular basis. If you find any loose screws, tighten them firmly.
Otherwise, the projector or wall mount may fall and cause personal injury or property
damage.
❏
Do not hang on the wall mount or hang a heavy object on the wall mount. If the projector
or wall mount falls, it could cause personal injury or property damage.
Screws (×2)
37