Epson BrightLink 475wi+ Guia De Instalacion página 71

C
Change the aspect ratio if necessary
Each time you press the [Aspect] button on the remote control, the aspect name is displayed on the
screen and the aspect ratio changes.
Change the setting according to the signal for the connected equipment.
Remote Control
Alternatively, set the aspect ratio from the Signal menu - Aspect. Following is a list of available aspect
settings:
•
Auto: Automatically sets the aspect ratio according to the input signal and the Resolution setting
(available only for HDMI image sources).
•
Normal: Displays images using the full projection area and maintains the aspect ratio of the image.
Choose this setting or Auto to automatically resize the image and make the best use of the display
area.
•
16:9: Converts the aspect ratio of the image to 16:9. 4:3 ratio images are elongated horizontally to fit.
•
Full: Displays images using the full width of the projection area, but does not retain the aspect ratio.
4:3 ratio images are elongated horizontally.
•
Zoom: Displays images using the full width of the projection area and maintains the aspect ratio of
the image. The image may be cut off on the top and bottom depending on its aspect ratio.
•
Native: Displays images as is (aspect ratio and resolution are maintained). Black bands may appear
or images may be cut off, depending on the resolution.
s Projector User's Guide: Signal Menu
D
Adjust the focus
1. Slide the air filter cover switch (
2. Use the focus lever to adjust the focus (
3. After you finish making the adjustment, close the air filter cover.
Aspect Ratio
Normal
) to open the air filter cover (
).
Focus lever
Air filter cover
31
).