Timken VHIN-G3-35 Manual De Instrucciones página 15

•
While the machine is starting up, a logo is displayed on the screen.
Starting up takes some time.
•
Connect the temperature sensor by inserting the plug into the socket. Make sure that the –
and + of the plug correspond to that of the socket.
•
The induction heater is now ready for use.
5. EXPLANATION OF DISPLAY, BUTTONS AND CONNECTIONS
- Touchscreen:
time or temperature
heating mode
settings
information
red temperature = T1
green temperature = T2
- Start /Stop button heating /
automatic demagnetisation
Sensor connections T1 and T2.
T1 (red on display) is the main temperature that controls
the heating process.
T2 (green on display) is an additional measurement
that can be used to monitor and adjust a temperature
difference, ΔT, in a workpiece during heating.
USB port for logging purposes (stored heating data).
EN
DE
ES
FR
NL
15