Timken VHIN-G3-35 Manual De Instrucciones página 49

11.4 Target functionality
In all heating modes, a "Target" button
heating. In this example, heating in the temperature mode is used for illustration purposes.
Pressing this button during heating allows the desired temperature or time (target) to be adjusted
up or down without having to stop the process.
By pressing "Target", a screen with the current setting and current value is displayed first.
By pressing the set value, a keypad is displayed on which the new value can be entered. After
entering the value, press "OK" to return to the heating screen.
Only this cycle is then heated to the new "target".
is displayed in the top right-hand corner during
EN
DE
ES
FR
NL
49