Timken VHIN-G3-35 Manual De Instrucciones página 37

10. LOG FUNCTIONALITY
10.1 Logging
Each heating mode has a slider on the screen with which the log functionality of the heater
"LOG" can be activated or deactivated. This functionality offers the possibility of defining certain
parameters for the heating process, such as temperature, time, power, operator and workpiece data.
NOTE!
In order to be able to log and export these data, an empty USB data carrier
(not supplied) must be plugged in to the USB port provided at the side of the
device.
If this functionality is activated, a menu appears each time the "START" button is pressed in which
data has to be entered. Only then can heating actually be started.
Pressing "START" displays the following screen:
Tap the item to be changed/entered. A keypad is displayed.
EN
DE
ES
FR
NL
37