Publicidad
Idiomas disponibles
Idiomas disponibles
▼Icon list
Displayed when "Energy saving operation" is
"ON".
Displayed when remote controller sensor is set.
(*1)
Displayed when "Night operation" is "ON".
Displayed when operations are locked by
central control. (*1)
Displayed when "Saving operation" is "ON".
®
Displayed when the Bluetooth
"ON". Refer to the Owner's Manual of the
®
Bluetooth
function regarding Bluetooth
functions.
Displayed when a check code occurs. (*1)
It reaches the set temperature, and displayed
while the room temperature is maintained.
*1: Refer to the Installation Manual of the Wired remote controller.
▼Heat recovery ventilation unit
• Displayed only when Heat recovery ventilation units are connected.
Automatic
Bypass
Heat exchange
81-EN
Displayed when "Timer" is "ON".
Displayed when "Louver lock" is set.
Displayed when it is time for filter maintenance.
Displayed when "Soft Cooling" operation is
"ON".
Displayed for about 3 seconds when the
operation mode is changed in the "Mode"
screen when the operation mode is restricted.
function is
Displayed when "Air purifier" function is "ON".
®
Displayed when a notice code occurs. (*1)
For details, contact your dealer.
It is displayed when a commercially available
ventilation unit connected to the air conditioner
is in operation.
24-hour ventilation
Nighttime heat purge
– 41 –
Operation button section
Preparation
Turn on the circuit breaker
When the power is turned on, " " appears on the remote controller display.
* The remote controller will not work for about 3 minute after turning on the power. This is not a malfunction.
REQUIREMENT
• Keep the circuit breaker turned on during use.
• When you resume using the Heat recovery ventilation unit after a long period of disuse, turn on the circuit breaker at
least 12 hours before starting operation.
Operating LED
Lights while operating.
1
2
3
Model name label
* The screens shown here are examples. The content that is displayed may differ, depending on the environment
settings being used.
1
[
Menu] button
Shows the "Menu".
2
[
Set/Fix] button
Fixes and applies settings.
Ways to use it are shown on screen.
3
[
Return] button
Deletes selections.
Ways to use it are shown on screen.
5
6
Temperature sensor
4
4
[
] and [
] buttons
Changes settings and selects items.
5
[
] and [
] buttons
Selects setting items.
Other ways to use it are shown on screen.
6
[
ON/OFF] button
Starts and stops connected devices.
82-EN
Publicidad
