Publicidad
Idiomas disponibles
Idiomas disponibles
7
Timer operation
For Timer operation in the remote controllers for RBC-AW(M)SU5* refer to the Owner's Manual of the
respective remote controllers.
Select a timer type from the following three: (Max. 168 hours)
OFF timer
: Stops running after a specified period.
Off reminder timer
: Stops running after a specified period every time the unit is used.
On timer
: Starts running after a specified period.
Timer (Setting a timer to start or stop operation)
Selecting a timer type
NOTE
About "Off timer" and "On timer" operations
• "Off timer" and "On timer" are enabled for only 1 time.
• "Off timer" and "On timer" do not operate in the following conditions.
When "Off timer" and "On timer" are disabled, during function settings, during central control (if "ON/OFF" is prohibited)
• When 2 remote controllers are connected, settings cannot be done on the "Follower remote controller".
• The setting range of "Off timer" and "On timer" is a minimum of 30 minutes and a maximum of 168 hours (7 days).
• Push [
Return] to not fix the changes, so conditions are as before changes, and return to the "Timer" screen.
• If there is a power outage, the "Off timer" and "On timer" settings are cancelled. (They become "OFF".)
• When "Off timer" and "On timer" are "ON", then "
93-EN
1
In "Menu", select "Timer", and push [
2
Push [
] and [
] to select the timer you want to set
3
Push [
Set/Fix]
" is displayed in the detailed display.
– 47 –
Off timer
You can set the timer to the time at which to stop operation of a Heat recovery ventilation unit.
Set/Fix]
NOTE
• The Heat recovery ventilation unit stops operating after the time set in "Off timer" has elapsed.
• In the period until the Heat recovery ventilation unit operation is stopped by the "Off timer", countdown of the "Off timer"
continues even if the Heat recovery ventilation unit is stopped and started.
Countdown of "Off timer"
Operating
Set "Off
timer"
1
In the "Off timer" screen, push [
"Off timer"
2
Push [
]
Pushing [
] cancels the settings.
3
Push [
] and [
] to select "Timer"
4
Push [
] and [
] to change the time
The time can be set in 30 minute intervals for up to 24 hours, and
at 1 hour intervals after that.
5
Push [
Set/Fix]
Return to the "Timer" screen.
Stop
Operating
Stopped
Operated
No time remaining in
manually
manually
"Off timer"
] and [
] to select
Stop
94-EN
Publicidad
