Publicidad
Idiomas disponibles
Idiomas disponibles
On timer
You can set the timer to the time at which to start operation of a Heat recovery ventilation unit.
NOTE
• The Heat recovery ventilation unit starts operating after the time set in "On timer" has elapsed.
• The Heat recovery ventilation unit stops operating as soon as a time is set in "On timer".
• When the Heat recovery ventilation unit operation is started during the countdown of "On timer", the "On timer" becomes
"OFF".
Countdown of "On timer"
Operating
Stopping operation by setting
"On timer".
Countdown of "On timer"
Operating
Stop
Stopping operation by
Operated
setting "On timer".
manually
95-EN
1
In the "On timer" screen, push [
] and [
"On timer"
2
Push [
]
Pushing [
] cancels the settings.
3
Push [
] and [
] to select "Timer"
4
Push [
] and [
] to change the time
The time can be set in 30 minute intervals for up to 24 hours, and
at 1 hour intervals after that.
5
Push [
Set/Fix]
Return to the "Timer" screen.
Stop
Operating
No time remaining in
"On timer"
Stop countdown of "On timer"
Operating
Stop
Stopped
manually
"Off timer" "On timer" operation
• "Off timer" "On timer" are valid only one time each.
• "Off timer" "On timer" do not operate in the following conditions.
When "Off timer" "On timer" is disabled, during abnormalities, during function settings, and during central control
] to select
(if "ON/OFF" is prohibited)
• When 2 remote controllers are connected, settings cannot be done on the "Follower remote controller".
• The setting range of "Off timer" "On timer" are a minimum of 30 minutes and a maximum of 168 hours (7 days).
• Push [
Return] to not fix the changes, so conditions are as before changes, and return to the "Timer" screen.
• When the power fails, "Off timer" "On timer" are canceled. (become "OFF".)
• When "Off timer" "On timer" are "ON", then "
Off reminder timer
You can set the timer from the Heat recovery ventilation unit operation start time to the stop time.
– 48 –
" is displayed in the detailed display.
1
In the "Off reminder timer" screen, push [
[
] to select "Off reminder timer"
2
Push [
]
Pushing [
] cancels the settings.
3
Push [
] and [
] to select "Timer"
4
Push [
] and [
] to change the time
Times can be set in 10 minute intervals.
5
Push [
Set/Fix]
Return to the "Timer" screen.
] and
96-EN
Publicidad
