Publicidad
Idiomas disponibles
Idiomas disponibles
Fan speed
Mode
24h ventilation off
91-EN
1
In the "Ventilation" screen, push [
] and [
select "Fan speed", and then push [
Set/Fix]
2
Push [
] and [
] to select "Fan speed"
3
Push [
Set/Fix]
Return to the "Ventilation" screen.
1
In the "Ventilation" screen, push [
] and [
select "Mode", and then push [
Set/Fix]
2
Push [
] and [
] to select "Mode"
3
Push [
Set/Fix]
Return to the "Ventilation" screen.
1
In the "Ventilation" screen, push [
] and [
select "24h ventilation off", and then push [
A screen to confirm appears.
2
Push [
Set/Fix]
Return to the "Ventilation" screen.
Schedule timer
You can use only on a Heat recovery ventilation unit system (one unit or multiple units).
] to
] to
] to
Set/Fix]
NOTE
• The items that are displayed vary depending on the model setting of the Heat recovery ventilation.
• For details on setting "week", refer to Owner's Manual of the wired remote controller.
– 46 –
1
In the "Ventilation" screen, push [
] and [
select "Schedule timer", and then push [
2
Push [
] and [
] to select "Condition setting", and
then push [
Set/Fix]
3
Push [
] and [
] to select "every day", and then
push [
Menu]
4
Push [
Set/Fix]
5
Push [
] and [
] to select "--" (not set), "ON",
"OFF" or a ventilation mode
6
Push [
] to select start time and fan speed
If "--" (not set) is displayed, the fan speed and time cannot be set.
7
Push [
] and [
] to change the time and fan speed
Push [
] to switch to an item you want to change.
8
Push [
] to move to the next pattern
Up to a total of 8 patterns can be set.
5
7
Do the settings in steps
to
to set each pattern.
9
Push [
Set/Fix]
A screen to confirm changes appears.
10
Push [
Set/Fix]
Return to the "Schedule timer" screen.
] to
Set/Fix]
92-EN
Publicidad
