cecotec BOLERO WASH&DRY 10680 INVERTER B Manual De Instrucciones página 12

SAFETY INSTRUCTIONS
- Read these instructions thoroughly before using the
device. Keep this instruction manual for future reference or
new users.
- Ensure that the mains voltage matches the voltage
specified on the device rating label and that the plug
is earthed.
- If the power cord is damaged, it must be replaced by the
official Cecotec Technical Support Service or by a similarly
qualified person to prevent hazards.
- This appliance is for indoor use only.
- Make sure the device is installed in places where the
temperature is above 0 ºC.
- The device is not designed for built-in installation.
- Use the hose set supplied with the appliance. Do not
reuse old hoses.
- Check hose connections regularly to ensure that no water
leaks out.
- Do not use the appliance if parts are missing or defective
or if the power cord or plug is damaged.
- Do not use the appliance until you are sure that it is
installed in accordance with the instructions provided in
this manual and all water, drain, electrical and grounding
connections comply with all applicable local regulations
and/or other requirements.
- Before carrying out any maintenance or cleaning in the
device, unplug the appliance from the mains.
12 BOLERO WASH&DRY 10680 INVERTER B / STEEL B