Descargar Imprimir esta página

cecotec BOLERO WASH&DRY 10680 INVERTER B Manual De Instrucciones página 18

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 77
- Water accumulated inside the appliance must be
drained out.
- Handle the machine carefully. Never hold each protruded
part on the machine while lifting. Do not use the door of
the device as a handle during transport.
- The device is heavy. Transport it with care.
- Secure the drain and water-supply hose correctly.
- Do not insert hands into the running water extracting tub.
- Do not close the door with excessive force. If it is found
difficult to close the door, please check if the clothes are
put in or distributed well.
- It is forbidden to wash carpets.
- Never refill the water by hand during washing.
Installation
- The appliance must be handled and installed by 2 or more
people to avoid risk of injury. Wear protective gloves
when unpacking and installing the product to avoid
cutting hazards.
- Keep children away during installation process.
- During installation, make sure that the power cable is not
damaged to avoid possible risk of fire or electric shock.
- Before using the device, it is imperative to remove the
transport screws.
- Keep the room dry and ventilated.
- Never place the appliance over the opening of an
uncovered drain.
18
BOLERO WASH&DRY 10680 INVERTER B / STEEL B

Publicidad

loading

Este manual también es adecuado para:

Bolero wash&dry 10680 inverter steel b02771027680277002769