Descargar Imprimir esta página

Mobvoi G4011 Manual De Instrucciones Del Producto página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
EN
Technical Parameters:
Working voltage
Max load
Outsize
Running area
Motor power
Speed
Incline
Control method
Weight
Spare parts list:
NO.
Name
1
M8*16 Screw
2
M8*45 Screw
3
M8*10 Screw
4
Φ8.5 Flat washer
5
Φ9 Curved spacer
6
M6*12 Screw
7
ST4.2*16 Bolts
8
5mm Hex wrench
9
6mm Hex wrench
10
Open-ended wrench
11
Handlebar
12
Moving trundle
13
Left tail housing, right tail housing
14
Safety lock
15
Methyl silicon oil
16
Manual, Qualification
Product Introductions 07
AC 220-240V 50/60 Hz
100 kg
L1319*W666*H1133 mm
400*1100 mm
1.0 HP
1.0-14.0km/h
0-15%
Console
45 kg
Qty.
Remark
2
Fixed to the back of risers
2
Fixed to the sides of risers
4
Fix left and right handlebars
2
2
4
2
Fix tail housings
1
Other
1
Adjust belt
1
2
2
1 for each
1
2
1
08 Installation Procedure
3. Installation Procedure
1) First, open the package, take the main body out of the box, and lay it flat on the carpet or
cushions. And the tail of the treadmill should be slightly padded with packaging material.
2) As shown in step ① of the figure, raise the left riser and right riser up to the limit position. As
shown in step ② of the figure, pass an "M8*45 Screw" through the Φ8.5 Flat washer to lock the
riser by using a "5MM Hex wrench". As shown in step ③ of the figure, pass an "M8*16 Screw"
through the Φ9 Spacer to lock the riser by using a "5MM Hex wrench".(The riser installation on
the other side is the same as in step ② and step ③ above).
3) As shown in step ④ of the figure above, use a "5MM Hex wrench" to rotate two "M8*10 Screws"
counterclockwise 1-2 times and adjust the angle of the console to the proper position according to
the arrow as shown above. Lock the console clockwise with the "M8*10 Screw" by using a "5MM
Hex wrench".
Insert the left and right handlebars into the left and right risers respectively and fix them with four
"M8*10 Screws" as shown in step ⑤ above. (Note: The handlebars should be parallel to risers).
EN

Publicidad

loading

Productos relacionados para Mobvoi G4011